China Custom Plastic Injection Molded Parts, UHMWPE Parts, Roller injection molding gun parts

Merchandise Description

Personalized Plastic Injection Molded Elements, UHMWPE components, roller

 

Products Description 
Our rewards:
Substance: UHMWPE/HDPE/PP/Nylon
Create Process: CNC, Injection etc.
Form: Any, in accordance to the drawing
Size: Any dimensions is available
Color: Black, White, Yellow, Eco-friendly, Blue and so forth.
Quickly cargo, limited creation time, outstanding good quality
Right here, we could fulfill all your requirements for custom-made plastic elements


Figures:

  • very flat on the surface  
  • The thickness tolerance is +2 -0mm,some made according to your requirements.
  • The color is pure and any color can be made by us.
  • We can give you an accurate size of UHMWPE Parts with advanced machine.
  • Different shaped UHMWPE parts also can be made by us like bending sheet.
  • According to different requirements with different application, special specifications can be customized, like anti-UV, fire-resistant,anti-static and with other characters.
  • Maximum abrasion resistance of any polymer, 6 moments much more abrasion resistant than steel
    Quite lower h2o absorption
    Superb impact resistance
    Great corrosion & chemical resistance
    Noise-absorption & Vibration-absorption

Exceptional Chemical Resistance Machined UHMW Polymer Parts Application

one. Conveyor Paddle
2. Affect Bar
3. Dock Bumper
four. Pipe Help Block
5. Chain manual
six. Pulley and Roller
7. UHMWPE Saddle or Block
eight. Equipment wear block and strips
9. Other machined components

Any size, Shape are obtainable with us.

Advantages

Self-lubricating.
Very good Abrasion&use resistance (15 moments a lot more resistant to abrasion than carbon metal).
Corrosion & impact resistant.
reduced temperature resistant.
Non-water absorption
Simple to machine

 

Residence: Take a look at Strategy (Common) Ticona GUI4152 Ticona GUI4150,4120 Unit
Molecular excess weight   three-9 million 3-9 million  
Density ISO 1183-1:2012/DIN53479 .ninety two-.ninety six .93-.96 g/cm³
Compression toughness ISO 604:2002 ≥30 ≥32 Mpa
Tensile power ISO527-2:2012 ≥20 ≥22 Mpa
Elongation at crack ISO527-2:2012 ≥300 ≥300 %
Dynamic Friction coefficient ASTM D 1894/GB10006-88 ≤0.20 ≤0.18  
Dynamic Friction coefficient ASTM D 1894/GB10006-88 ≤0.20 ≤0.18  
Notched affect strength (Charpy) ISO179-1:2571/GB/T 1043.1-2008 ≥100 ≥100 kJ/m2
Abrasion dress in index ES-X65710-2008 ≤30 ≤30 mg
Vicat softing stage ISO306:2004 ≥80 ≥80 °C
Hardness shore-D ISO 868:2003 sixty five sixty six D

Our manufacturing unit

FAQ
Q: Are you buying and selling firm or company ?
A: We are manufacturing unit.
Q: How extended is your delivery time?
A: Normally it is 5-10 days if the merchandise are in inventory. or it is fifteen-twenty times if the goods are not in inventory, it is in accordance to quantity.
Q: Do you give samples ? Is it free or added ?
A: Of course, we could supply the sample for totally free demand but do not pay the expense of freight.
Q: What is your terms of payment ?
A: Payment=1000USD, thirty% T/T in advance, balance prior to shippment.

We can personalized any condition in accordance the drawings, if you are intrigued, please do not be reluctant to get in touch with us!
 

US $2-5
/ kg
|
200 kg

(Min. Order)

###

After-sales Service: 24 Hours Sevice Available
Warranty: 5 Years
Type: Wear Resistant
Application: Machine
Certification: ISO9001:2015
Condition: New

###

Samples:
US$ 15/kg
1 kg(Min.Order)

|
Request Sample

###

Customization:

###

Property: Test Method (Standard) Ticona GUI4152 Ticona GUI4150,4120 Unit
Molecular weight   3-9 million 3-9 million  
Density ISO 1183-1:2012/DIN53479 0.92-0.96 0.93-0.96 g/cm³
Compression strength ISO 604:2002 ≥30 ≥32 Mpa
Tensile strength ISO527-2:2012 ≥20 ≥22 Mpa
Elongation at break ISO527-2:2012 ≥300 ≥300 %
Dynamic Friction coefficient ASTM D 1894/GB10006-88 ≤0.20 ≤0.18  
Dynamic Friction coefficient ASTM D 1894/GB10006-88 ≤0.20 ≤0.18  
Notched impact strength (Charpy) ISO179-1:2010/GB/T 1043.1-2008 ≥100 ≥100 kJ/m2
Abrasion wear index ES-X60210-2008 ≤30 ≤30 mg
Vicat softing point ISO306:2004 ≥80 ≥80 °C
Hardness shore-D ISO 868:2003 65 66 D
US $2-5
/ kg
|
200 kg

(Min. Order)

###

After-sales Service: 24 Hours Sevice Available
Warranty: 5 Years
Type: Wear Resistant
Application: Machine
Certification: ISO9001:2015
Condition: New

###

Samples:
US$ 15/kg
1 kg(Min.Order)

|
Request Sample

###

Customization:

###

Property: Test Method (Standard) Ticona GUI4152 Ticona GUI4150,4120 Unit
Molecular weight   3-9 million 3-9 million  
Density ISO 1183-1:2012/DIN53479 0.92-0.96 0.93-0.96 g/cm³
Compression strength ISO 604:2002 ≥30 ≥32 Mpa
Tensile strength ISO527-2:2012 ≥20 ≥22 Mpa
Elongation at break ISO527-2:2012 ≥300 ≥300 %
Dynamic Friction coefficient ASTM D 1894/GB10006-88 ≤0.20 ≤0.18  
Dynamic Friction coefficient ASTM D 1894/GB10006-88 ≤0.20 ≤0.18  
Notched impact strength (Charpy) ISO179-1:2010/GB/T 1043.1-2008 ≥100 ≥100 kJ/m2
Abrasion wear index ES-X60210-2008 ≤30 ≤30 mg
Vicat softing point ISO306:2004 ≥80 ≥80 °C
Hardness shore-D ISO 868:2003 65 66 D

Importance of Wall Thickness in Injection Molded Parts

When designing injection molded parts, it is important to keep the wall thickness uniform. Uneven wall thickness can lead to warping and sinking. To minimize these problems, injection molded parts should have a wall thickness of 40 to 60 percent of the adjacent wall. The thickness of the wall should also fit within the range recommended for the resin that is being used. If the wall thickness is too thick, it should be cored out. Unnecessary wall thickness alters the dimensions of the part, reduces its strength, and may require post-process machining.

Designing out sharp corners on injection molded parts

Injection molded parttDesigning out sharp corners on injection molded components can be a challenging process. There are several factors to consider that impact how much corner radius you need to design out. A general rule is to use a radius that is about 0.5 times the thickness of the adjacent wall. This will prevent sharp corners from occurring on a part that is manufactured from injection molding.
Sharp corners can obstruct the flow of plastic melt into the mold and create flaws on parts. They can also cause stress concentration, which can compromise the strength of the part. To avoid this, sharp corners should be designed out. Adding radii to the corners is also an effective way to avoid sharp angles.
Another common problem is the presence of overhangs. Injection molding parts with overhangs tend to have side-action cores, which enter from the top or bottom. As a result, the cost of making these parts goes up quickly. Moreover, the process of solidification and cooling takes up more than half of the injection molding cycle. This makes it more cost-effective to design parts with minimal overhangs.
Undercuts on injection molded parts should be designed with a greater radius, preferably one or two times the part’s wall thickness. The inside radius of corners should be at least 0.5 times the wall thickness and the outside radius should be 1.5 times the wall thickness. This will help maintain a consistent wall thickness throughout the part. Avoiding undercuts is also important for easy ejection from the mold. If undercuts are present, they can cause a part to stick inside the mold after it has cooled.
Keeping wall thickness uniform is another important issue when designing plastic parts. Inconsistent wall thickness will increase the chance of warping and other defects.

Adding inserts to injection molded parts

Adding inserts to injection molded parts can be a cost-effective way to enhance the functionality of your products. Inserts are usually manufactured from a wide range of materials, including stainless steel, brass, aluminum, bronze, copper, Monel, nickel/nickel alloy, and more. Selecting the right material for your parts depends on the application. Choosing the correct material can help prevent defects and keep production cycles short. The insert material should be durable and resist deformation during the injection molding process. It must also be thin enough to provide the desired grip and have a proper mold depth.
The benefits of adding inserts to injection molded parts include the ability to design parts with unique shapes. These parts can be aesthetically pleasing, while still remaining durable and resistant to wear and tear. In addition, insert molding allows products to have a good external finish. In addition to being cost-effective, insert molding is considered a more efficient manufacturing method than other conventional methods.
Adding inserts to injection molded parts is an excellent way to enhance the strength and performance of your products. There are many different types of inserts, including threaded nuts, bushings, pins, and blades. Some types are even available with knurled outer surfaces that help them adhere to plastic.
In addition to being cost-effective, insert molding is environmentally friendly and compatible with many types of materials. Typical inserts are made of metal or plastic. Depending on the application, stiffening inserts may also be made from wood.

Importance of uniform wall thickness

Injection molded partThe uniformity of wall thickness is an essential factor in the plastic injection molding process. It not only provides the best processing results, but also ensures that the molded part is consistently balanced. This uniformity is especially important for plastics, since they are poor heat conductors. Moreover, if the wall thickness of an injection molded part varies, air will trap and the part will exhibit a poorly balanced filling pattern.
Uniform wall thickness also helps reduce shrinkage. Different materials have different shrinkage rates. For instance, thick parts take longer time to cool than thin ones. As the part’s thickness increases, cooling time doubles. This relationship is due to the one-dimensional heat conduction equation, which shows that heat flows from the center of the part toward the cooling channel. However, this relationship does not hold for all types of plastics.
The general rule for maintaining uniform wall thickness in injection molded parts is that walls should be no thicker than 3mm. In some cases, thicker walls can be used, but they will significantly increase production time and detract from the part’s aesthetic appeal and functionality. Furthermore, the thickness of adjacent walls should be no thicker than 40-60% of each other.
The uniformity of wall thickness is critical to the overall quality and efficiency of the injection molding process. An uneven wall thickness can cause twisting, warping, cracking, and even collapse. A uniform wall thickness also reduces residual stress and shrinkage. Injection molded parts are more stable when the wall thickness is uniform.
An injection molded part with thick walls can be problematic, especially when the molded parts are shaped like a cube. A non-uniform wall thickness can result in problems and costly retooling. Fortunately, there are solutions to this problem. The first step is to understand the problem areas and take action.

Using 3D printing to fabricate molds

splineshaftThe use of 3D printed molds allows manufacturers to manufacture a wide range of injection molded parts. However, 3D-printed molds are not as strong as those made from metallic materials. This means that they do not withstand high temperatures, which can degrade them. As such, they are not suitable for projects that require smooth finishing. In order to reduce this risk, 3D-printed molds can be treated with ceramic coatings.
Using 3D printing to fabricate injection molds can help reduce costs and lead times, allowing manufacturers to bring their products to market faster. This process also has the advantage of being highly efficient, as molds made using 3D printing can be designed to last for many years.
The first step in fabricating an injection mold is to design a design. This design can be complex or simple, depending on the part. The design of the mold can be intricate. A simple example of a mold would be a red cup, with an interior and exterior. The interior portion would have a large cone of material protruding from the other side.
Injection molding is an effective way to produce thousands of parts. However, many engineering companies do not have access to expensive 3D printers. To solve this problem, companies should consider using outside suppliers. In addition to speeding up the manufacturing process, 3D printing can reduce the cost of sample parts.
Plastic injection molding still remains the most popular method for high volume production. However, this process requires a large up-front capital investment and takes a while to adapt. Its advantages include the ability to use multiple molds at once, minimal material wastage, and precision dosing. With an increasing number of materials available, 3D printing can be a smart option for companies looking to manufacture a variety of plastic parts.
China Custom Plastic Injection Molded Parts, UHMWPE Parts, Roller     injection molding gun partsChina Custom Plastic Injection Molded Parts, UHMWPE Parts, Roller     injection molding gun parts
editor by czh 2023-01-02